Help with SOCKET/694 VIA AMIBIOS v2.08

pao376

THere is no FSB setting to this BIOS
Any help or anything!please help me, I just want to improve the performance.

This is my Info

BIOS Type: American Megatrends
BIOS Date: 01/01/01
BIOS ID:62-315A-010101-00101111-071595-V694V686-NARA
OEM Sign-On: Version 2.08
Super I/O: VIA 686 rev 34 found at port 7h
Chipset: VIA 82C605 rev 129

cp · Posted: Sat Jun 02, 2007 9:34 am Post subject:

latest bios:
http://h10025.www1.hp.com/ewfrf/wc/genericSoftw...twareitem=pv197en

the mainboard is an oem version. if you post more information (look on the mainboard, post what's written there..model, maker, etc.) you could try to flash the original mainboard bios instead.

pao376 · Posted: Sat Jun 02, 2007 1:10 pm Post subject:

Sir cp, I forgot(sorry...)to tell you that Im using Win 98SE,
And may I ask, Is there a chance that I can overclock my mothereboard?
If Yes tell me what to do,If No WAhhhhhhhhhh!

Thank You Sir!

More little info:
GenuineIntel
x86 Family 6 Model 8 Stepping 6

And I also want to ask,I have checked my motherboard and there is two chips named:VIA VT82C694X and VIA VT82C6B6A and (i dont know how to tell it) It is a little chip namd CRYSTAL CS4281-CM-EP and below it:ATACJC0041.

Thanks For Replying.(Only few today are so kind)

cp · Posted: Sun Jun 03, 2007 10:16 am Post subject:

hmm..first of all you have to find out a bit more about the cpu you are using. please get CPUID and post the part of the report that contains info about the cpu.

The mainboard's chipset is capable of running a 133MHz FSB which is the maximum for a Socket370 chipset. Some memory tweaks could leave you with a faster system, even without changing the FSB.

pao376 · Posted: Mon Jun 04, 2007 8:09 am Post subject:

Here we go...(Sorry for the late reply)

CPU:
Name: Intel Pentium III EB
Codename: Coppermine Brand ID:2
Package: Socket 370 FCPGA
Technology: 0.18um Voltage: 0.006v
Specification: Intel Pentium III EB 933Mhz
Family: 6 Model: 8 Stepping: 6
Ext.Family: 6 Ext.: 8 Revision: cC0
Insructions: MMX,SSE
Clocks (Core#0)
Core speed: 933Mhz(I reaaly cant tell because of the applications running)
Multiplier: x 7.0
Bus Speed: 133.0 Mhz
Cache
L1 Data 16 Kbytes
Descriptor: (4 way set associative , 32 byte line size)
L1 Code 16 Kbytes
Level2 256 Kbytes
L1 Instructions Cache
Size:16 Kbytes
Descriptor: 4 way set associative, 32 byte line size
L2 Cache
Size: 256 Kbytes
Descriptor: 8-way set associative, 32 byte line size
Mainboard
Manufacturer: TriGem Inc.
Model: Nara-A 1.0
Chipset: VIA ApolloPro 133Z/PM133 Rev.81
Southbridge:VIA VT82C686
Sensor: VIA 686A/B
BIOS
Brand: American Megatrends Inc.
Version 2.01
Date:04/14/01
Memory: 256 Mbytes
SPD
Memory Slot 1:SDRAM
Module Size: 120 Mbytes
Max Bandwidth: PC100 (100Mhz)
Manufacturer: SAMSUNG
Part No. KMM3 66S1623CT -GL
Serial No. 20D00101
Manufacturing:Week 153 yr.01
Timings Table
Frequency
83Mhz 100Mhz
CAS# Latency
2.0 3.0
RAS To CAS#
2 2
RAS#
2 2
Tras
5 5
(The Same with Slot2)
Now...can I overclock it?

Thanks For Helping! Smile

Denniss · Posted: Mon Jun 04, 2007 12:20 pm Post subject:

To improve performance you should replace the PC-100 SDRAM with PC-133 SDRAM. You have a CPU designed to run with 133 MHz FSB but your ram is only certified for 100 MHz. Thus your CPU has to wait for data very often. Things get worse if OnBoard VGA with shared-memory is used.
_________________
32GB/64GB-BUG patched and tested BIOS
Uniflash - flash anything everywhere

pao376 · Posted: Mon Jun 04, 2007 12:37 pm Post subject:

But the question is.....Can I overclock it to improve performance,to squeeze out CPU power?

KachiWachi · Posted: Mon Jun 04, 2007 12:43 pm Post subject:

FAQ #29
_________________
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).

cp · Posted: Mon Jun 04, 2007 8:27 pm Post subject:

as i already wrote in my 2nd post: no, you can't (not without overclocking everything else and maybe ending up with an unstable system). 133MHz is the maximum that any Socket370 chipset supports.

pao376 · Posted: Tue Jun 05, 2007 1:25 am Post subject:

Okay.....I will not push it anymore,but could you suggest things that can boost the performance of my CPU,and could you give me a clock frequency for my GeForce4 MX440 AGP 8X but has a driver of GeForce4 MX440.
Thank You Smile

pao376 · Posted: Tue Jun 05, 2007 2:02 am Post subject:

I almost forgot,could you link me the latest BIOS update for my American Megatrends Inc.
Here is the String:
62-315A-041401-00101111-071595-V694V686

cp · Posted: Tue Jun 05, 2007 3:05 pm Post subject:

for a bios update check the link in my 1st post.

for more cpu power buy either a faster cpu or a whole new system.

for any nvidia overclocking attempts get this:
http://downloads.guru3d.com/download.php?det=815

pao376 · Posted: Wed Jun 06, 2007 3:14 am Post subject:

Okay!done. But why is it that when I move my mouse the mouse pointer is not moving compared to my last BIOS.

cp · Posted: Wed Jun 06, 2007 5:29 am Post subject:

and you did what exactly? did you update the bios? did you load default setup settings afterwards? is the mouse connected via usb?