| View previous topic :: View next topic |
| Author |
Message |
Elessar
New visitors - please read the rules.
Joined: 11 Aug 2006
Posts: 4
|
 Posted: Fri Aug 11, 2006 9:30 pm
Post subject: Can't select floppy option |
 |
|
Hi,
I just got a new computer which didn't come with a floppy drive installed. Needing to transfer some files, I put the floppy drive in and went into BIOS to complete the installation. However, BIOS won't let me select the floppy option (it is greyed out), much less turn it on. I have a Phoenix - Award WorkstationBIOS v6.00PG, and everything except the floppy option is working fine and I can select it. What can I do?
|
|
| Back to top |
|
 |
|
|
edwin
The Hardware Archivist
Joined: 20 Mar 2002
Posts: 4313
Location: Netherlands
|
| Posted: Sat Aug 12, 2006 10:23 pm
Post subject: |
|
|
Enable the onboard floppy controller first, it's in the onboard peripherals section.
_________________
edwin/evasive
Do not assume anything
System error, strike any user to continue... |
|
| Back to top |
|
|
Elessar
New visitors - please read the rules.
Joined: 11 Aug 2006
Posts: 4
|
| Posted: Wed Aug 16, 2006 8:14 pm
Post subject: Re:Can't select floppy option |
|
|
| Thats the funny thing about it! The onboard floppy controller is already enabled. I've even tried disabling it, exiting BIOS, then going back in and enabling again, exiting, then re-entering to turn the floppy on, and yet nothing changes - I still can't select the floppy!
|
|
| Back to top |
|
|
Elessar
New visitors - please read the rules.
Joined: 11 Aug 2006
Posts: 4
|
| Posted: Fri Sep 15, 2006 11:55 pm
Post subject: Re:Can't select floppy option |
|
|
Any ideas, anyone? 
|
|
| Back to top |
|
|
Denniss
BIOS Guru
Joined: 21 Mar 2002
Posts: 2862
Location: Near Hannover (CEBIT) Germany
|
| Posted: Sat Sep 16, 2006 2:02 am
Post subject: |
|
|
Are you not able to set the floppy to a specify drive type or are you not able to enable it in your boot priority ?
You usually have two options to fully enable a floppy drive: Enable the Flopy controller (as done) and set a pecify drice type, this is usually done on the same page your HDDs are listed.
What motherboard do you have ? Maybe it requires to use a more or less hidden "expert" option to change this ? What does your motherboard manual say to a Floppy ?
_________________
32GB/64GB-BUG patched and tested BIOS
Uniflash - flash anything everywhere |
|
| Back to top |
|
|
edwin
The Hardware Archivist
Joined: 20 Mar 2002
Posts: 4313
Location: Netherlands
|
| Posted: Sat Oct 07, 2006 1:37 pm
Post subject: |
|
|
Some boards do have the "hide floppy in windows 95" option. I never understood that one but it is possible.
_________________
edwin/evasive
Do not assume anything
System error, strike any user to continue... |
|
| Back to top |
|
|
KachiWachi
The New Guy
Joined: 29 Mar 2002
Posts: 1372
Location: Pennsylvania, USA
|
|
| Back to top |
|
|
Elessar
New visitors - please read the rules.
Joined: 11 Aug 2006
Posts: 4
|
| Posted: Sat Dec 01, 2007 5:31 pm
Post subject: |
|
|
| Denniss wrote: | | Are you not able to set the floppy to a specify drive type or are you not able to enable it in your boot priority? |
I am able to enable it in my boot priority, but not assign it to a drive. The option says "Drive A: None", but it is greyed out and I can't select it to make any changes.
| Denniss wrote: | | You usually have two options to fully enable a floppy drive: Enable the Floppy controller (as done) and set a specific drive type, this is usually done on the same page your HDDs are listed. |
How would I set a drive type other than changing drive A?
| Denniss wrote: | | What motherboard do you have ? Maybe it requires to use a more or less hidden "expert" option to change this? What does your motherboard manual say to a Floppy ? |
I have an NF-CK804 motherboard, but I can't find the manual.
|
|
| Back to top |
|
|
|
Forum FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
