Forum FAQForum FAQ SearchSearch MemberlistMemberlist   UsergroupsUsergroups RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Wim's BIOS RSS FeedRSS Log inLog in

Alert! Incompatible Processor Detected. System Halted

 
Post new topic   Reply to topic    Wim's BIOS Forum Index -> My CPU isn't recognized

Recommended by Wim's BIOS...

BIOS Agent scan: Upgrade your BIOS! Driver Agent scan: Instant Access to 116,215 Device Drivers Updates!

View previous topic :: View next topic  
Author Message
***gyro***
New visitors - please read the rules.


Joined: 13 Jul 2008
Posts: 3

PostPosted: Sun Jul 13, 2008 11:39 pm     Post subject: Alert! Incompatible Processor Detected. System Halted Reply with quote

This is the message that I am getting on my Dell GX280 mini tower. I had my motherboard go out and replaced it with another with the same part #. The new board will run with a 2.8 G CPU but not with the original 3.6 G CPU. I have tried everything that I can think of and it is still not working.

I have done the following:

1. Rest the CMOS many times.
2. Changed the service tag & express service code to match the original.
3. Tried the most recent BIOS ver 07.
4. Tried the original BIOS for this machine, ver 03.
5. Tried ver 04 BIOS.

The USB went out on the original motherboard. The 3.6 G CPU will run on the original motherboard OK. Like I said the machine runs good and passes all Dell diagnostics OK with the 2.8 G CPU but will not boot with the 3.6 G CPU. Any ideas on this would be greatly appreciated.
Back to top
View user's profile Send private message
***gyro***
New visitors - please read the rules.


Joined: 13 Jul 2008
Posts: 3

PostPosted: Mon Jul 14, 2008 4:52 am     Post subject: Update Reply with quote

I got this machine running. After looking all over the internet, I found a posting on a diferent model Dell with the same problem. So here is where I am at now. I did the following:

1. Put the 2.8 G CPU in and got the machine up.
2. Loaded the ver 00 BIOS.
3. Cleared the CMOS.
4. Removed the 2.8 G CPU and installed the 3.6 G CPU.
5. Booted the machine up.

Here is the outcome:

1. The machine is running at 2.8 G.
2. The bios reports the CPU as 3.6 G.
3. XP reports the CPU as 3.6 G but running at 2.8 G.

This will get me by for now. I am behind on my work because of this and need to crank out some drawings before I can fiddle with this again.
Back to top
View user's profile Send private message
edwin
The Hardware Archivist


Joined: 20 Mar 2002
Posts: 4313
Location: Netherlands

PostPosted: Fri Sep 19, 2008 11:57 am     Post subject: Reply with quote

I think the GX280 should handle a 3.6GHz processor nicely unless you got the wrong family of CPUs. What S-spec is it?
_________________
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Back to top
View user's profile Send private message Send e-mail Visit poster's website
***gyro***
New visitors - please read the rules.


Joined: 13 Jul 2008
Posts: 3

PostPosted: Fri Sep 19, 2008 3:23 pm     Post subject: Reply with quote

Thanks for the reply! The S spec is SL7Q2
CPU rating is 3.6GHZ/1M/800/04B
Back to top
View user's profile Send private message
edwin
The Hardware Archivist


Joined: 20 Mar 2002
Posts: 4313
Location: Netherlands

PostPosted: Fri Sep 19, 2008 4:42 pm     Post subject: Reply with quote

http://processorfinder.intel.com/details.aspx?sSpec=SL7Q2

I've been looking at gx280 combined with 560J but no success reports on that so far, I'll keep looking for an answer...
_________________
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Back to top
View user's profile Send private message Send e-mail Visit poster's website
KachiWachi
The New Guy


Joined: 29 Mar 2002
Posts: 1372
Location: Pennsylvania, USA

PostPosted: Sat Sep 20, 2008 12:06 pm     Post subject: Reply with quote

Just out of curiosity, why did you have the motherboard replaced?

Bad Caps?


Thanks.
_________________
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Wim's BIOS Forum Index -> My CPU isn't recognized All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group